Page 8 / 27
connected and the device has 51% battery remaining, the braille cells will read [Battery 51%]. If
the charging cable is connected and the device has 51% battery remaining, the braille cells will
read [Charging 51%].
It is recommended that you charge the device when your battery level is below 10% to prevent
the device from being discharged.
III. [Starting the Dot Mini]
1. Dot Book
You can edit or read a book by connecting the Dot Mini to a PC or external storage device. You
can choose to read the file in braille or audio. The Dot Book supports TXT, BRF, epub, and daisy
file formats.
When you click the book and then press the enter key, the sentence [In what format would you
like to read?] will be displayed both in braille and audio. The book can then be opened by
pressing the up or down direction keys or by pressing the enter key.
*In audio mode, braille is not displayed.
1) Checking the current location
Pressing the enter key while reading a book will allow you to check your current page location in
the book. You will be notified of your paragraph and location with respect to the total number of
paragraphs through audio or braille. In braille mode, your braille display will show [paragraph:
current location / total number of paragraphs].
For example, if you are reading the third paragraph of a book consisting of 100 paragraphs, you
will hear or read in braille [paragraph: 3/100].
2) Highlight
To Next Page
Loading...