Part No. 0110-003114 Page 3 of 3 1-25-2011 DSL
STARTING THE ENGINE
Start the engine and allow it to warm up to operating temperature. Check for any unusual
noises or exhaust leaks. If every thing is OK, stop the engine and tighten all bolts while
the engine is still warm.
NOTE: Check the bolts periodically to make sure they have not loosened. Re-tighten
after the first 500 miles and then again at 1000 miles.
PARTS LIST
Qty Description
1 Left side header
1 Right side header
2 Header gaskets
12 3/8 X 1“, header bolts
12 Lock-washer
2 Doug’s Stickers
A/C Bracket Modification ~ Cut shaded area
1963-67 Rocker modification
1967-82 Rocker modification
To Previous Page
Loading...