Installation and configuration
A36951-C.doc
188/236
Ŷ Initialize/Configure Printer
These functions are used for initializing the printer when it is first commissioned into
service and for changing settings when the printer is in operation.
Select dialog language
Printer preparation/Initialization//Language
The language used on the Operator Interface is selected via a dialog box.
Initialize date and time
Printer preparation/Initialization/Autoclock
This function is for setting the printer time and date.
Note: see "Using date and time" in the "Message editing" section of this manual for further
details on date and time settings.
Set head/object distance
Printer preparation/Initialization/Message/Head-Object Distance
This function is used for setting the distance (d) between the head and the object to be
printed for each type of head. Default settings are:
Ƒ 10 mm for a G head.
Ƒ 08 mm for an M head.
Ƒ 06 mm for a P head.
This distance is determined by algorithms combining the type of head and the maximum
print speeds beign used.
NOTE The physical distance between the head and the object should
be adjusted to suit the ink used, as indicated on the Ink
Running Specification or the technical data sheet for the ink.
To Next Page
Loading...
