Dover Markem-Imaje LASER 7031 - Page 141

Troubleshooting
A70622-D1
141/192
Reference Part Number Designation
1
ENM70918 Touch screen 12”
2
ENM70919 Cable Touch screen<->PC board 5315
3
ENM70920 Converter board DC/DC 24V-12V
4
ENM70663 Touch screen controller board
5
ENM70245 Leds keys assembly
6
ENM70886 Ferrite clamps (Alarm signal)
In case of touch screen failure, if the controller is not equipped with the last generation of touch
screen, it is mandatory to follow the instructions below.
Touch screen
Generation
Available spare parts After sales policy Upgrade kit
Generation 1
ELO touch
screen
(ENM70252)
No spare parts available
Mandatory to upgrade with LG
generation 3
ENM70739 :
Equipped cover
and screen
(Note1)
Generation 2
LG touch screen
ENM70663 : Touch screen controller board
ENM70664 : Back light board
In case of touch screen failure 
upgrade with LG generation 3 is
mandatory
ENM70936
see Note2
Generation 3
New LG touch
screen
ENM70918 : LG Touch screen 12”
ENM70920 : Converter board DC/DC 24V / 12V
ENM70663 : Touch screen controller board
Part could be replaced at
component level (see available
spare part)
N/A
1
4
3
5
2
6
The following spare parts references
(from n° 1 to n° 6) are applicable for the last generation of
LG Touch screen
Note1: Kit ENM70739 (from G1 to G3)
Expected availability: Q2 2013
Equipped cover and screen contains:
A70918: LG Touch screen 12”
A70919: Cable Touch screen<->PC board 5131
A70920: Converter board DC/DC 24V / 12V
A70886: Ferrite clamps (Alarm signal)
A70663 : Touch screen controller board
A70660 : PC board 5315……
Note 2: Kit ENM70936 (from G2 to G3)
Expected availability: Q2 2013
A70920: Converter board DC/DC 24V / 12V
A70919: Cable Touch screen<->PC board 5131
A70918: LG Touch screen 12”
A70886: Ferrite clamps (Alarm signal)