Troubleshooting
A70622-D1
149/192
SPS Removing Electronic Plate 1 / 1
Special Tools
Flat Screwdriver 6mm + Allen Key 2mm
Prerequisite
Switch off the laser
Unplug from the mains supply
Remarks
This Procedure is a standard procedure
1
PC board : Unplug
LVDS and the Touch screen
connectors from the display (C)
USB connection (D)
Port COM connector (E)
Interface board : Unplug
The ribbon cable from the
interconnect rack board Assy (B)
The white connector from the LED
key assembly (A) by unlocking it
with a flat screwdriver
2
Remove the electronic plate by
unscrewing the four (4) large
screws (F)
To Next Page
Loading...