Dover Markem-Imaje LASER 7031 - Page 157

Troubleshooting
A70622-D1
157/192
SPS Replacing Focal Lens 1 / 2
Special Tools
Lens tool kit
Prerequisite
Switch off the laser / Unplug from the mains supply
Remarks
1
Position the tool onto the lens support and
undo it.
The lens is delivered with its support
Insert the new lens and tighten the support.
NOTE: For old 0° heads, you will need to
remove the front cover of the head to access
lens suppo
rt
When changing lens types, as well as the focal length, some other settings have to be modified like :
 The focal distance,
 Gain
2
Focal lens setting modifications
From the main screen, go to the settings menu:
►Option settings ►head settings
Modify the focal distance to match with the
new lens.
Lens tool kit