Troubleshooting
A70622-D1
168/192
SPS Recovery the 7031 Bios configuration 1 / 2
Special Tools
External keyboard and mouse
External screen
Prerequisite
-
Remarks
This procedure explains how to configure the PC board BIOS if configuration is lost.
It can appear:
- If Button cell ran down or has been disconnected.
- When installing a new PC board.
1
Switch off the laser and
unplug from the mains
supply
Open the controller cover.
Connect the external
screen, keyboard and
mouse to the PC board.
2
Reconnect the controller
from the mains and switch
on the controller.
During the start-up, press
the “Del” key to access to
the main Bios menu.
3
Check that each
parameters of your Bios
configuration remain the
same as those given in the
following pictures.
Note: from the bios menu
press the “Enter” key to
access features. Then select
the right configuration using
the “Enter” and “arrow” keys.
Press “Esc” to come back to
the main menu.
Standard CMOS Features Advanced BIOS Features
Press DEL key
Bios menu
To Next Page
Loading...