Printer description
A70622-D1
45/192
Print repeat mode
The Print repeat mode will offer users the ability to print many messages from the same
DTOP,
In addition to the distance between two prints, the user will have the ability to indicate the
number of prints.
The following information should be taken in to consideration when using such a function:
The number of prints to repeat (limited to 100) : if the value of “Print repeat” input box is
set to 0, the system will re-print the message indefinitely.
The pitch value calculated by controller following laser settings set should always be less
than (or equal) to the value of “Product interval” set.
Refer to TB121201 & TB111206 for more details
To Next Page
Loading...