Dover markerm-imaje 2200 - Adjustments and Calibration; Test Pattern and MPS Adjustment

To Next Page

To Previous Page

Instruction manual 16

Adjustments

■ Test pattern

The test pattern displays the printer conguration and must

resemble the example.

Feed a continuous roll of paper in the printer before running a

test pattern.

1 - Turn off the printer for approx. 15 seconds.

2 - Turn the printer back on while pressing the Print key.

3 - Hold the key depressed until the grey test target is printed.

To return to normal operation, turn the printer off then back on.

■ Automatic adjustment of the Media Position

Sensor (MPS)

4 - Press and hold the key for 7 seconds after printing the grey

test target.

5 - The automatic control starts and white labels are fed through

the printer.

6 - The automatic adjustment of the MPS is nished when the

printer stops.