Appendix F- Icon Glossary (cont.)
Sensor Alarms in the Alarm Calendar
Alarm Ended But
Not Acknowledged
Part numbers and description that would be
associated to the conditions.
Icon only seen
during auto-
detection process to
show sensor type.
Icon outlined with a
dotted red line and
red triangle. Occurs
when an alarm
condition is seen.
Icon outlined in blue
with red triangle.
Occurs when user
clicks on alarm in
alarm screen.
Icon outlined in blue
and triangle is blue.
Occurs when alarm
has ended but has
not been
acknowledged.
Icon completely gray.
Occurs after alarm
has been
acknowledged and
the alarm event has
ended.
Displayed when
the item is
currently
unavailable. Icon
is completely
grayed.
Hydrocarbon Vapor Sensor: 30-0235-V
Alarm Conditions
Occurs when the resistance is above the
threshold for the alarm condition.
Disconnect Alarm/Communication Loss
Occurs when the sensor has been disconnected
from the barrier or the sensor fails.
Liquid Only Float Sensor (Brass): 30-0231-S
Alarm Conditions
Occurs then the float is above the threshold for
the alarm condition.
Disconnect Alarm/Communication Loss
Occurs when the sensor has been disconnected
from the barrier or the sensor fails.
Discriminating Interstitial Sensor (Optical): 30-0236-LW
Hydrocarbon Alarm
Occurs when the resistance is above the
threshold for the alarm condition.
NOTE: When sensors are added manually to the system when using non-smart sensors or adding sensors to a VSmart Module, the icons will have a little man in the
upper-left-hand corner of the icons, as shown to the right.
To Next Page
Loading...
