Appendix F- Icon Glossary (cont.)
Alarm Ended But
Not Acknowledged
Part numbers and description that would be
associated to the conditions.
Icon only seen
during auto-detection
process to show
sensor type.
Icon outlined with a
dotted red line and
red triangle. Occurs
when an alarm
condition is seen.
Icon outlined in blue
with red triangle.
Occurs when user
clicks on alarm in
alarm screen.
Icon outlined in blue
and triangle is blue.
Occurs when alarm
has ended but has
not been
acknowledged.
Icon completely
gray. Occurs after
alarm has been
acknowledged and
the alarm event has
ended.
Displayed when the
item is currently
unavailable. Icon is
completely grayed.
High-Water Alarm:
Occurs when the water float is above the
threshold for the alarm condition.
High-Temperature Alarm:
Occurs when the temperature read by the
probe is above the threshold for the
condition. Thermometer filled in red.
Low-Temperature Alarm:
Occurs when the temperature read by the
probe is below the threshold for the
condition. Thermometer filled in blue.
Theft Alarm:
Occurs when the site is closed and there is a
decrease in the tank’s volume.
Tank-Down Alarm:
Occurs when the console loses
communication with the probe.
NOTE: When sensors are added manually to the system when using non-smart sensors or adding sensors to a VSmart Module, the icons will have a little man in the
upper-left-hand corner of the icons, as shown to the right.
To Next Page
Loading...
