Dover OPW SiteSentinel iSite - Page 113

Page 113 of 145
www.opwglobal.com
Appendix F- Icon Glossary (cont.)
System Alarms
Description
Normal
Alarm
Acknowledged
Alarm Ended But
Not Acknowledged
Alarm Condition
Ended
Unavailable
Part numbers and description that would be
associated to the conditions.
Icon only seen during
auto-detection
process to show
sensor type.
Icon outlined with a
dotted red line and
red triangle. Occurs
when an alarm
condition is seen.
Icon outlined in blue
with red triangle.
Occurs when user
clicks on alarm in
alarm screen.
Icon outlined in blue
and triangle is blue.
Occurs when alarm
has ended but has
not been
acknowledged.
Icon completely gray.
Occurs after alarm
has been
acknowledged and
the alarm event has
ended.
Displayed when the
item is currently
unavailable. Icon is
completely grayed.
Line Leak .02:
N/A
Line Leak .03:
N/A
Communication:
N/A
N/A
Leak Alarms:
Occurs when a leak test has been run on a
tank and fails, resulting in a leak detected.
N/A
Reconciliation:
N/A
N/A
System:
N/A
N/A
Subsystem:
Occurs when the console loses
communication to an external module
(VSmart, Smart, OM4)
N/A
N/A