2.6
Internal Printer
An internal thermal printer option is available for the SiteSentinel®
iSite™ Console. The printer will install inside the cabinet. The printer will
be used for printing the various reports the SiteSentinel® iSite™ has
available.
2.6.1 Installation Procedure
1.
Mount Printer Power Supply above the existing power supply.
2.
Slide printer onto mounting bracket.
3.
Mount printer and bracket in SiteSentinel® iSite™ Console
fixing to four (4) pre-drilled holes.
4.
Connect power cable to 3-connector power plug (CN1) on left-
hand side of power supply board.
5.
Connect printer power cable to 6-connector plug (CN2) on right-
hand side of board.
6.
Connect printer ribbon cable to J22 on right-hand side of main
communication board.
Figure 2-19 Internal Printer
Figure 2-19 Main Board Printer Connections
To Next Page
Loading...
