8.2
VSmart Module Installation
The VSmart Modules must be mounted on a wall using ONLY the
mounting tabs provided. Knockout locations are shown in Error!
eference source not found.3. VSmart Modules require AC power and
communication connection to the console.
Figure 8-3 VSmart Module Knockouts
Figure 8-4 VSmart Mounting Dimensions
8.3
Line Interface Module (LIM) Installation
The Line Interface Module must be mounted on a wall using ONLY the
mounting tabs provided. Knockout locations are shown below. LIMs
require AC power and communication connection to the console.
Figure 8-5 LIM Knockouts and Dimensions
To Next Page
Loading...
