Ethernet, etc., connecting hardware.
l Port 8: Allows a secondary device such as an OPW Automatic Tank Gauge to be communicated with a
PC through the FSC3000 Pass-Thru serial port. This eliminates the need for an additional PC
connection to the Tank Gauge for sites using the optional Phoenix™ software, polling both the
FSC3000 fuel transactions and ATG data for performing site reconciliation.
n Communication parameters for the ATG connected to the Pass-Thru port must match the
FSC3000 communication parameters.
M1700 FSC3000 Installation Manual | Dover Fueling Solutions 36
To Next Page
Loading...