Dover Wayne Helix WM048523 - Replacement Procedures; Display Glass and Speakers

14.3 Replacement Procedures
Perform the steps in the individual sections that follow for replacing boards or other components
that are mounted on the backside of the bezel.
14.3.1 Display Glass and Speakers
1
Remove bezel by performing the steps in previous Section 14.2.
2
Remove the four screws from the Main Mounting Bracket. Use 3 mm hex key.
screws, 4
3
Disconnect speaker cables from R2 board and disconnect Y-cable to the other speaker.
WM048523 Rev 08 01/2019 211
14 Models with Metal Electronic Head - IEC