Dover Wayne Helix WM048523 - VGA Softkeys and Preset Keypad

14.3.3 VGA Softkeys and Preset Keypad
VGA Softkeys:
1
Remove bezel by performing the steps in previous Section 14.2.
2
Remove the R2 Board/bracket from the main mounting bracket by performing steps 1-10 in
previous Section 14.3.2.
3
Set R2 board/bracket assembly close by, as shown below, so that the display can be removed
without disconnecting the cable from the display.
WM048523 Rev 08 01/2019 225
14 Models with Metal Electronic Head - IEC