5
Remove two 6 mm Allen screws in the WIP magnet box, and pull the box up and set aside.
Fig 16.29.
Figure 16.29: WIP magnet box
Please note, the picture shows Helix 1000 LPG. The WIP magnetic box in Helix 6000 LPG
and Helix 6000 B2B LPG is turned 90 degrees in relation to how it is mounted in Helix 1000
LPG.
294 WM048523 Rev 08 01/2019
16 Helix LPG - IEC
To Next Page
Loading...
