19
Select YES if dispenser is using a secure magnetic card reader only.
20
On the keypad, enter the terminal number for the opposite side and then press the ENTER
key. Note: The screen below is for monochrome only. It will not appear on VGA or color QVGA
since there is an iX Pay Secure Payment board for each side.
Note!
At this point the configuration data is copied to side B.
21
Test the operation of each softkey then press CANCEL.
336 WM048523 Rev 08 01/2019
A iX Pay™ Secure Payment Configuration U.S. Version (Optional)
To Next Page
Loading...
