Dover Wilden Original Series - Suction Lift Curves & Data; T4 METAL Air-Controlled; A4 METAL Accu-Flo

11
WILDEN PUMP & ENGINEERING, LLCWIL-10260-E-02
SECTION 6A – AIR-CONTROLLED
SUCTION LIFT CURVES & DATA
SECTION 6B – ACCU-FLO™
SUCTION LIFT CURVES & DATA
Suction lift curves are calibrated for pumps operating at
1,000' (305 m) above sea level. This chart is meant to be
a guide only. There are many variables which can affect
your pump’s operating characteristics. The number of intake
and discharge elbows, viscosity of pumping fluid, elevation
(atmospheric pressure) and pipe friction loss all affect the
amount of suction lift your pump will attain.
Suction lift curves are calibrated for pumps operating at
1,000' (305 m) above sea level. This chart is meant to be
a guide only. There are many variables which can affect
your pump’s operating characteristics. The number of intake
and discharge elbows, viscosity of pumping fluid, elevation
(atmospheric pressure) and pipe friction loss all affect the
amount of suction lift your pump will attain.
PTFE Diaphragms
[0.7] [1.4] [2.0] [2.7] [3.4] [4.1] [4.8] [5.5] [6.2] [6.9]
Ultraflex™/PTFE Diaphragms
[0.7] [1.4] [2.0] [2.7] [3.4] [4.1] [4.8] [5.5] [6.2] [6.9]