Doyle Sailmakers Inc.
1.800.94.DOYLE
info@doylesails.com
20
ZIPPING AND CLOSING THE STACKPACK
Figure 7a and 7b
Grasp the zipper tail at the aft (clew) end of the cover, (see Figure 7b) work the zipper car
forward to the acrylic cover. Pinch the two sides of the cover together while zipping the car
onto the acrylic for the first 12".
After that, the car should run freely with an occasional push or tuck to the leech and batten
ends, if they poke out.
When the cover is zipped almost all the way to the mast, remove the halyard from the head
of the sail and fasten it to the ring on the starboard side of the cover. If your cover has a
bronze hook, run the halyard through
the hook and you will not have to disconnect at the head. Either way will prevent the
halyard from slapping against the mast.
To Next Page
Loading...