Need help?Do you have a question about the DP Audio Video DP318AP and is the answer not in the manual?
General| Display Size | 7 inches |
|---|---|
| Resolution | 800 x 480 pixels |
| Touchscreen | Yes |
| USB Port | Yes |
| SD Card Slot | Yes |
| Bluetooth | Yes |
| FM Radio | Yes |
| Power Output | 4 x 45W |
| Compatibility | Universal |
| Supported Media Formats | MP3, JPEG, AVI |
Key safety instructions for proper unit installation and use.
Guidance on understanding and utilizing the user manual for optimal product experience.
Important warnings and advice for safe operation and preventing damage to the unit.
Instructions for cleaning, replacing fuses, and battery replacement for the remote control.
Identifies physical controls and ports on the unit's front and base panels for user reference.
How to cycle through different radio frequency bands (FM1, FM2, FM3, MW, LW).
Methods for tuning radio stations manually or automatically scanning for signals.
Instructions on how to choose radio stations using directional or scan buttons.
Switching between reception of local (LO) and distant (DX) radio stations.
Toggle between Mono (MO) and Stereo (ST) reception modes for radio broadcasts.
How to display current source information on the unit's screen.
Details on buttons and functions related to iPod operation and playback.
Methods for selecting previous/next tracks or navigating through track lists.
Navigating back to the main directory of the connected iPod.
Returning to the prior directory level during iPod navigation.
Information on how the unit handles video playback from an iPod.
Procedure for safely disconnecting and removing the iPod from the unit.
Illustration and explanation of buttons on the card remote control for system operation.
Details on buttons and functions for playback of various media formats.
Setting custom images as wallpaper and procedures for disconnecting USB/SD devices.
Technical details including power, dimensions, weight, and performance specs for different sections.
Overall technical parameters like power, load impedance, dimensions, and weight.
Frequency ranges, sensitivity, and IF range for AM and FM radio reception.
Performance metrics for the CD player, including signal-to-noise and distortion.
Technical details for DVD playback, including channel count and frequency response.
Diagram and explanation of how to connect all audio, power, and signal wires correctly.
How to temporarily stop and resume playback for various media formats.
Instructions on playing video content in slow motion for VCD format.
How to adjust the video display aspect ratio during playback.
Displaying playback information like time, chapter, or source on the unit's screen.
Step-by-step guide for detaching and reattaching the unit's front panel.
How to insert discs or connect USB/SD devices to initiate playback.
Selecting TV system (AUTO, PAL, NTSC) for VCD playback.
Setting options to repeat tracks, chapters, or titles during playback.
Enabling random playback sequence for VCD/CD/MP3/MPEG-4/SD/USB media.
Procedures to stop playback for different media types and how to resume.
Method for installing the unit using the DIN front-mount bracket system.
Alternative method for installing the unit using screw holes on the sides.
Guide to loading factory defaults and configuring preferences like TV Type, Audio, Subtitle.
How to set the language for the DVD disc's menu navigation.
Configuring parental control levels to restrict content based on age ratings.
Procedure for setting or changing the unit's access password.
Step-by-step instructions for removing the main unit from its mounting.
Instructions for cleaning the unit and front panel connectors to ensure proper function.
Setting the unit's TV display standard (Auto, PAL, NTSC) for optimal video output.
Selecting preferred audio languages for DVD playback from available options.
Choosing desired subtitle languages for DVD content from available options.
Procedure to reset the unit to factory default settings for troubleshooting.
How to power the unit on and off using the PWR button or inserting a disc.
Adjusting the audio volume using the remote control or the main unit's dial.
Adjusting audio settings like Balance, Fade, Bass, Treble, and Equalizer.
Selecting preset equalizer modes (POP, CLASSIC, ROCK, FLAT) for sound tuning.
Enabling the loudness function to boost low-frequency sound output.
Temporarily silencing the audio output via the mute button.
Using the CLEAR button to dismiss error messages displayed on the unit.
Procedure to force eject a disc when it is locked or not responding.
Activating night mode to dim the display and button lights for nighttime driving.
Switching between different operating modes like Radio, DVD, USB, etc.
Adjusting the video display aspect ratio (e.g., 4:3, 16:9) for optimal viewing.
How to release and detach the front panel from the main unit.
Connecting portable media players via the A/V jack for audio playback.
Accessing and navigating the main menu structure for system settings.
Configuring audio settings like Balance, Fade, Bass, Treble, and Equalizer.
Setting the unit's TV display mode (Wide, Normal/PS, Normal/LB) for video output.
Configuring the display of angle marks for DVDs that support multiple camera angles.
Selecting the desired language for the On-Screen Display menus and prompts.
Adjusting video settings including Brightness, Contrast, Color, and Hue.
Fine-tuning video image parameters like Contrast, Brightness, Color, and Hue.
Switching between available audio tracks for DVD playback in different languages.
Selecting desired subtitle languages for DVD content from available options.
Navigating DVD menus and titles to select specific chapters or content.
Accessing system settings that remain constant, like default language and preferences.
Configuring which sources (Radio, USB, SD, Disc, iPod, AUX) are active for selection.
Adjusting the display to WIDE (whole screen) or NORMAL (4:3) aspect ratio.
Setting the default color mode for video playback (Standard, Vivid, Soft, User).
Using numeric buttons to directly select tracks or chapters during playback.
Setting options to repeat chapters or titles during DVD playback.
Setting a specific time to stop playback automatically, similar to a sleep function.
Switching between multiple camera angles available on some DVDs.
Displaying playback status like elapsed time, chapter, or remain time.
Configuration menu for clock system, key beep, and reverse polarity settings.
Setting the clock to 12-hour or 24-hour format.
Setting the current time for the unit's clock.
Enabling or disabling the audible beep feedback for button presses.
Adjusting the reverse camera display polarity if it's not shown correctly.
Initial steps for playing a DVD disc, including powering on and selecting DVD mode.
Navigating to the previous or next track/chapter during DVD playback.
Fast forwarding or rewinding through a DVD track at different speeds.
How to pause or completely stop DVD playback and resume later.
Playing DVD content in slow motion, forwards or backwards.
Selecting the standard TV system (AUTO, PAL, NTSC) for DVD playback.
Zooming in on the video display to enlarge the picture size during playback.
How to pause and resume DVD playback using the pause button.
How to pause and resume DVD playback using the pause button.
Playing DVD content in slow motion, forwards or backwards.
Selecting the standard TV system (AUTO, PAL, NTSC) for DVD playback.
Zooming in on the video display to enlarge the picture size during playback.
To Next Page