DP THE BIG LEBOWSKI - Page 15

PREPARE THE LEGS AND LEG LEVELERS
STEP 7
The tightening nut on the leg levelers should be all to the bottom for the
two front legs and approximately two-thirds from the top of the leg leveler.
Thread the leg leveler into the legs until de tightening nut is against the
underside of the leg and tighten it with a standard 3/8” (or 10 mm) wrench.
STEP 8
Mount the two front legs with two bolts for each leg.
Front legs Rear legs Mounted on the leg
GAME SETUP INSTRUCTIONThe Big Lebowski Pinball | Operaons Manual
15