REV1.0
Dr.coffee Service Manual 19
7.4.2 Maintenance
Maintenance: Set the condition values for various maintenance intervals of the machine. click save to effect.
Brewer warming up
Indicates whether the coffee machine needs to be turned on for warm-up and the conditions for starting the warm-up function can be set.。
For example
：
setting”20 minutes later” it means if the coffee machine no operated in 20 minutes, warming up function works. That is to make any coffee drink after 20 minutes,
a pop-up prompt "Brewer warming up?"
Brewer deep clean
After indicating how many cups of coffee to make the coffee machine, the machine will automatically prompt you to use the tablets for deep cleaning of the brewing system. The unit
is: cup.
For example
：
Default setting “1000”, after the coffee machine has made 1000 cups of drinks, the machine will automatically prompt you to use the tablets for deep cleaning of
the brewing system.
Milk frother rapid rinse
Indicates the conditions under which the milk system is set for rapid flushing. Selection range: No, Immediate, 5 minutes, 10 minutes, 15 minutes, 20 minutes.
Set to “No” to indicate that the machine does not automatically flush the milk system automatically, no matter how many cups of milk is made. Only when it is turned on or off.
Set to “Immediately” to indicate that the machine will begin a quick flush of the milk system as soon as the coffee machine has finished making the current milk drink.
Set to “5 minutes”, the machine will count down to 5 minutes after the last cup of milk drink is made. When the time arrives, it will prompt that the milk system needs to be
rinsed quickly.
Milk system deep clean
After indicating how many cups of milk-making beverages are set up in the coffee machine, the machine will automatically prompt that the milk system needs to be deeply cleaned
with a milk detergent, in the unit: cup.
For example: the default setting is “200”, which means that after the coffee machine makes 200 cups of milk-containing drinks, the machine will automatically prompt you to
use the milk detergent for deep cleaning of the milk system.
Descaling setting （
cup）
After indicating how many cups of milk-making drinks are made in the coffee machine, the machine will automatically prompt you to descale the coffee machine with descaling
powder. The unit is: cup
For example, the default setting is “3000”, which means that after the coffee machine makes 3000 cups of milk with milk, the machine will automatically prompt you to descale
the coffee machine with descaling powder.
Descaling setting（
time）
Indicates the time when the coffee machine is set to make steam. After the accumulated number of hours, the machine will automatically prompt you to descale the coffee machine
with the descaling powder. The unit is: hour.
For example, the default setting is “16”, which means that after the coffee machine has accumulated steam for 16 hours (57600 seconds), the machine will automatically
prompt you to descale the coffee machine with descaling powder.
※ The descaling setting (cup ) and the descaling setting (time) are prompted to execute the condition first. After the descaling operation is performed as required, all
conditions are reset and the calculation is restarted.
Technicup Service Manual
To Next Page
Loading...
