REV1.0
Dr.coffee Service Manual 23
7.4.6 Process control
Process control：
Turn it on or off to make a function that can be adjusted during the making of a drink. Click Save to effect
Turning on this function means that during the process of making a drink, you can click the interface “+” and “-” to temporarily adjust the parameters of this drink; (default:
open)
If this function is turned off, the “+” and “-” used to adjust the amount will be grayed out in the beverage making interface, and it will be invalid when clicked.
7.5 Eng. setting
Method to enter：Click on "Eng. Setting", enter your password and click OK to enter.
Eng. Code is a set of calculation formulas. That is, the current time, the sum of the two digits of the hour and the value of the two digits of the minute (for example, the
current time is 13:05, then: 1+3=04, 0+5=05, the password at this time) That is: 0405)
Technicup Service Manual
To Next Page
Loading...
