Dr.coffee F11 Series - Disassemble Front Panel

REV1.0
Dr.coffee Service Manual 35
9.2.1.2 Disassemble front panel
Step1：First unscrew (as shown in Figure 1) the position shown by the red circle, the four fixing screws of the coffee bean
container, and then remove the coffee bean container.；
Step2：Use a flat-blade screwdriver to press (as shown in Figure 1 to Figure 5) the buckle at the position indicated by the
red arrow to release the buckle at these five positions.；
Step3：Hold the upper cover up and lift it out, then pull out the upper cover and remove the upper cover.
★ Attention：
1、Before disassembling the bean box, please empty the coffee beans inside the bean container！
2、Handle gently during disassembly to prevent scratching！
2
1
2
1
4
5
3
1
2
Technicup Service Manual