Dr.coffee F11 Series - Disassemble Brew Unit

REV1.0
Dr.coffee Service Manual 38
9.2.2 Disassemble brew unit
Step1：Unscrew the fixing screw at the position marked by the red circle (as shown in Figure 1), press the button at the arrow
position with your finger and remove the baffle.
Step2：Pull out the plug and hose at the position indicated by the arrow (as shown in Figure 1), then unscrew (as shown in
Figure 2) the fixing screw at the position indicated by the red circle, grasp the brewer and take it out, remove the
brewer.
★ Attention：
1、Please disassemble the machine after it has cooled down to prevent burns！
2、In the process of disassembly, you can use both hands to take care of it, beware of bruises！
1
2
1
2
3
4
Technicup Service Manual