REV1.0
Dr.coffee Service Manual 39
9.2.3 Disassemble switch valve
Step1：First (as shown in Figure 1), use a small slotted screwdriver to press the buckle with the short arrow to indicate
the position, and then push the split valve back to the fixed slot.
Step2：Unplug the two wiring plugs (as shown in Figure 1, 2) by the arrow
Step3：Unplug the hose and water pipe connected to the red circle, and finally take out the split valve and remove the split
valve.
★ Attention：
1、Unplug the coffee machine before doing this！
2、There may be residual water in the pipe. Please prepare the water container in advance.！
Technicup Service Manual
To Next Page
Loading...
