REV1.0
Dr.coffee Service Manual 42
9.2.7 Disassemble front panel group
Step1：First unplug (as shown in Figure 1) the wiring plug at the position indicated by the arrow, then unscrew the two fixing
screws at the position marked by the red circle (as shown in Figure 1), and then unplug the three water pipes marked
by the arrow (Figure 2).
Step2：(Figures 1, 2) Press with a flat-blade screwdriver, six arrows indicate the position of the buckle and loosen the buckle.
Step3：(Figure 1, 2) Grab the front panel group with both hands, pull out the entire assembly forcefully, remove the front
panel group to complete.
★ Attention：
1、The display is made of glass. Please take it lightly during the disassembly process to prevent the glass from breaking！
Technicup Service Manual
To Next Page
Loading...
