Dr.coffee F11 Series - 9.2.11 Disassemble Pump

REV1.0
Dr.coffee Service Manual 45
9.2.11 Disassemble pump
Step1：First unplug the plug (as shown in Figure 1), then remove the small spring clip (as shown in Figure 2) and pull out
the water pipe. Then press the water pump to remove the water pump.
Step2：According to the position shown by the arrow (as shown in Figure 1), pull out the silicone water pipe connected to
the pump, and finally take out the pump set and remove the pump set.
★ Attention：
1、Unplug the coffee machine before doing this！
2、There may be residual water in the pipe. Please prepare the water container in advance！
1
2
3
2
3
1
Technicup Service Manual