Dr.coffee F11 Series - 9.2.13 Disassemble Brew Motor Group

REV1.0
Dr.coffee Service Manual 47
9.2.13 Disassemble brew motor group
Step1：First pull out the wiring plug (as shown in Figure 1, 2)
Step2：Then unscrew (as shown in Figure 1) the two fixing screws at the position marked by the red circle, and finally take
the drive unit out and take out the drive set to complete.
★ Attention：
1、Unplug the coffee machine before doing this！
1
2
2
3
1
Technicup Service Manual