Dr.coffee F11 Series - 9.2.14 Disassemble

REV1.0
Dr.coffee Service Manual 48
9.2.14 Disassemble
Step1：First pull out (as shown in Figure 1) the position of the arrow plug.
Step2：Then pull out (as shown in Figure 1) the position of the wiring plug and the water pipe.
Step3：Finally, use a flat-blade screwdriver to press (as shown in Figure 1). The short arrow indicates the position of the
buckle, and in the direction of the long arrow, push the inlet valve group to the right.
★ Attention：
1、Unplug the coffee machine before doing this！
2
1
2
1
2
1
Technicup Service Manual