14 15
1. Remove glass from unit and
load from the top with water.
2. Click button to turn device on
* 3 times for titanium nail
* 5 times for ceramic/quartz nail
3. Load product
on tip of tool
4. Once light changes color
(Approx 30 seconds), touch
tip of the tool to nail and
begin to inhale through glass
mouthpiece.
5. Once all product has melted
off of tool, flip tool around and
place carb cap on top of the
nail to increase vapor density.
(Generally 3-4 seconds)
HOW TO
USE YOUR BOOST
SIT BACK
AND ENJOY!
To Next Page
Loading...
