Do you have a question about the Dräger Medical D-Vapor and is the answer not in the manual?
Brand | Dräger Medical |
---|---|
Model | D-Vapor |
Category | Vaporizers |
Language | English |
Covers instructions, maintenance, liability, accessories, explosive environments, and electrical coupling.
Important recommendations for safe operation, handling, and patient safety with the D-Vapor.
Heated, calibrated anaesthetic vaporiser for enriching dry, fresh medical gas with Desflurane.
Covers care instructions, operating modes, control dial functions for ON/OFF, concentration, and transport.
Details adapters, interlocks, installation, filling system, and level indicator.
Explains alarm systems, indicators, suppression, and general recommendations.
Covers battery requirement, initial checks, power cable connection, and pre-operation charging.
Procedures for fitting connectors and compatibility with specific anaesthetic delivery devices.
Step-by-step guide for filling the D-Vapor with Desflurane.
How to connect the D-Vapor to various anaesthesia delivery system connector types.
Essential checks before operation, including checklist, monitor requirements, and visual checks.
Covers switching on, self-test, delivering, changing, and ending anaesthetic agent delivery.
Details battery operation, interruption, removal, and transport guidelines.
Lists common faults, their causes, and remedies for the D-Vapor.
Guidelines for cleaning and disinfecting the D-Vapor unit.
Comprehensive checks to ensure the apparatus is ready for operation after maintenance or prolonged downtime.
Procedures for verifying delivered concentration and correcting measured values.
Steps for draining, blowing out, proper disposal, storage, and despatching the D-Vapor.
Procedures for cleaning, inspection, and service by skilled personnel.
Identifies key components of the D-Vapor and explains the display panel indicators.
Summarizes classification, environmental conditions, performance values, electrical, and EMC data.
Lists concentration accuracy, capacity, agent loss, fill time, resistance, heating, noise, and interfaces.
Covers nominal voltage, power, earth leakage current, weight, dimensions, and EMC safety distances.
Explains the internal workings, gas flow, and control mechanisms of the D-Vapor.
Details calibration process and how flow, carrier gas, ambient pressure, and temperature affect performance.
Provides formulas to correct flow measurements influenced by Desflurane concentration.
Lists part numbers for power cables, accessories, batteries, and manuals.
Defines technical abbreviations used throughout the manual.
Explains the meaning of symbols used in the manual and on the device.