Supplement | Atlan A300, A350 ceiling-mounted versions and wall-mounted version 39
Wall-mounted version
2. Connect all necessary cables and hoses at the rear of the device:
– Central supply hoses (4)
– 2nd compressed gas hose for oxygen (5)
– Power cable (6)
3. Check that the floor underneath the wall mount is level and clear. There must be
no objects underneath the wall mount.
4. Use the service cart to move the device to the wall mount.
Pay attention to the direction of pushing.
5. Using the crank handle, lower the lifting unit of the wall mount until the trunnions
are below the level of the mount on the device.
6. Insert the push bar in the hole provided on the service cart and lock it by turning
it clockwise.
4391843786
To Next Page
Loading...
