44 Supplement | Atlan A300, A350 ceiling-mounted versions and wall-mounted version
Wall-mounted version
18.Remove the crank handle.
5.2.3 Undocking from the wall mount
Prerequisite:
– The locking lever on the service cart is in the unlocked position.
– The device has been switched off at the main switch. Follow the information in
the instructions for use for the device.
1. Check that the floor under the device is level and cleared. There must be no
objects under the device.
2. Swivel all fitted arms in towards the center of the device.
3. Fix the arms or use a strap to prevent them from swinging out in an uncontrolled
way.
4. Remove any devices and accessories that may interfere with the undocking.
5. If necessary, use the crank handle to raise the lifting unit of the wall mount so
that the service cart can be pushed under the device.
6. Insert the push bar in the hole provided on the service cart and lock it by turning
it clockwise.
Move the service cart to the device.
43742
To Next Page
Loading...
