Dräger Atlan A350 - Docking to the Ceiling Supply Unit

Supplement | Atlan A300, A350 ceiling-mounted versions and wall-mounted version 55
Ceiling-mounted version with integrated castors
6.2.3 Docking to the ceiling supply unit
The following describes docking to a ceiling supply unit with lifting function, e.g.,
Movita lift.
Prerequisite:
– If the device is docked with a ceiling supply unit with a key switch, the key switch
must be in the horizontal position.
1. Connect all necessary cables and hoses at the rear of the device:
– Central supply hoses (1)
– Power cable (2)
2. Check that the floor below the ceiling supply unit is level and cleared. There
must be no objects below the ceiling supply unit.
4362443064