Dräger Medical AG & Co. KGaA 6173.3
All rights reserved. Copyright reserved.
Version 1.0_ Released_Printed on_18.05.05_GBK61733XXA01.fm
9
Babylog 8000 General
1Notes This Technical Documentation/Service Manual conforms to the International
Standard IEC 60601-1.
Read each step in every procedure thoroughly before beginning any test.
Always use the proper tools and specified test equipment. If you deviate from
the instructions and/or recommendations in this Technical Documenta-
tion/Service Manual, the equipment may operate improperly or unsafely, or
the equipment could be damaged.
Use only original Dräger parts and supplies.
The maintenance procedures described in this Technical Documenta-
tion/Service Manual may be performed by qualified service personnel only.
These maintenance procedures do not replace inspections and servicing by
Dräger Medical AG & Co. KGaA.
1.1 Symbols and Defini-
tions
Strictly follow the Instructions for Use/Operating Instructions! This
Technical Documentation does not replace the Instructions for
Use/Operating Instructions. Any use of the product requires full
understanding and strict observation of the product-specific Instruc-
tions for Use/Operating Instructions.
Unless otherwise stated, reference is made to laws, regulations or stan-
dards (as amended) applicable in the Federal Republic of Germany.
This symbol indicates a warning.
This symbol indicates tips and useful information.
This symbol is used to alert against unsafe practices when handling elec-
trostatic sensitive devices (ESD).
Definitions according to German standard DIN 31051:
Inspection = examination of actual condition
Maintenance = measures to maintain specified condition
Repair = measures to restore specified condition
Servicing = inspection, maintenance, and repair
To Next Page
Loading...
