Page 1 of 4
Technical Information
Technical Documentation for Babylog 8000 plus
according to EMC standard IEC/EN 60601-1-2: 2001
General Information
The EMC conformity includes the use of following external cables, transducers and accessories (see the
following table):
Designation Order no.
Flow sensor 8410185
Flow sensor connecting cable 8409626
Communication conversion kit 8411108
Analog cable 8306487
MIB connecting cable 5198952
Additionally, accessories may be used which do not affect EMC compliance, if no other reasons interdict the
use of them (see chapter Order List in the Instructions for Use manual). Non-compliance may result in
increased emissions or decreased immunity of the Babylog 8000 plus.
Babylog 8000 plus should not be used adjacent to or stacked with other equipment. If adjacent or stacked
use is inevitable, Babylog 8000 plus should be observed to verify normal use in the configuration in which it
will be used.
Other equipment which can be used adjacent to or stacked with the Babylog 8000 plus are listed in the
Instructions for Use manual, in the Order List chapter or in the following table.
Designation Order no.
Fisher & Paykel humidifier - accessories 84 14 144
Optional graphic screen 84 15 834
ECG monitoring Various, on demand
2004-09-24
To Next Page
Loading...
