Dräger Babylog 8000 - 10.12 Potentiometer Field; 10.13 Display Field

All rights reserved. Copyright reserved.
_ _Printed on_18.05.05_F61733XXT01.fm
50
Dräger Medical AG & Co. KGaA 6173.3
Function description Babylog 8000
10.12 Potentiometer Field
The Potentiometer Field comprises the following components:
 6 potentiometers (O
2
vol.%, T
I
, T
E
, Insp. Flow , P
insp
, PEEP/CPAP)
 9 LEDs (O
2
vol.%, T
I
, T
E
, Insp. Flow , P
insp
, PEEP/CPAP, CPAP, IPPV, reserve)
 3 keys (CPAP, IPPV, reserve) (Vent. Mode, Vent. Option, reserve as of software version 5.n
10.13 Display Field
The display field contains the following components:
 11 keys (silence, reset, man./insp., menu, keys 1 to 6, light). The "light" key is only available on
Babylog 8000 with LC display. The key signals are read in via the Front Controller PCB or the Front
PCB.
 LED array of the bargraph. The LED array is controlled via the Display PCB.
 7 LEDs (warning (yellow), mode, monitoring, silence, triggers 1 to 3). The LEDs are controlled via the
Front Controller PCB or the Front PCB.
 2 red alarm LEDs. The LEDs are controlled via the Monitoring PCB/Watchdog PCB.