Dräger Babylog VN800 - Touch, Turn, Confirm Interaction Method

|
11
Operating concept
Using the screen − Colours
Touch – Turn – Conrm
Rotary knob
If the device is turned on, the rotary knob is back lit
with a colour.
Orange The selected function or setting must
be conrmed by pressing the rotary knob.
10 seconds before the time during which
the conrmation may be performed ends,
the background lighting ashes.
Blue After the device is turned on, the background
lighting shines for 2 seconds.
Touch
the control element.
The control element
turns orange.
Turn
the rotary knob to the right or
to the left to make the setting.
The value is displayed in the
control element.
Conrm
by pressing the rotary knob.
The setting is applied, and
the control element turns gray
or blue again.
Selecting and setting parameters and functions