Dräger Evita 2 Dura - Evita Remote and Nurse Call Setup

5664.500/800 Evita 4/Evita 2 dura 06/98 Repair Instructions Page 27
For internal use only. Copyright reserved. GBR5664500T055664800.fm 18.03.99
Dräger Medizintechnik
D
X6 (RS232 socket COM2)
Pin Assignment
2 RXD-COM2 (RS232 input)
3 TXD-COM2 (RS232 output)
5 GNDISO-1 (ground for RS232 interface)
X10 (Background debug mode interface)
Pin Assignment
1 GND (ground)
2 BKPT (BREAK input)
3 GND (ground)
4 FREEZE (status signal from 68332)
5 RESETQ (Reset signal)
6 IFETCH (status signal from 68332)
7 +5 V (operating voltage)
IPIPE (status signal from 68332)
X13 (ISO2 voltage test connector)
Pin Assignment
1 +5 V ISO-2 (operating voltage)
3 GND ISO-2 (ground)
X14 (Operating voltage test connector)
Pin Assignment
1 +5 V
2 GND (ground)
3+15 V
4 VPP (programming voltage)