Dräger Evita 2 Dura - Screen; Selecting the Displayed Combination of Measured Values

75
Configuration
Screen
Screen
Selecting the displayed combination of measured values
Evita 2 dura displays a group of 6 selectable measured values
in the right-hand field of the main page.
An alternative second group can be displayed by pressing
the »Values «.
These two groups can be composed in the configuration
page:
● Press the »Calib./Config.« menu key.
● Press the »Display jj« menu key.
● With the »Display jj« menu key, select the »Values« menu.
Display (example):
To replace one displayed measured value by another:
● Select the relevant screen field = turn the rotary knob.
Activate = press the rotary knob.
The selection list with all available measured values is then
displayed on the right of the screen.
Display (example): Replacing MV
● Select the other measured value, e.g. »PEEP« = turn the
rotary knob.
Confirm = press the rotary knob.
531
1 2
520521