Dräger Evita 2 Dura - Selecting the Displayed Curves

Configuration
76
Screen
Selecting the displayed curves
Evita 2 dura shows two curves in the left-hand field of the main
page.
A different pair of curves can be selected by pressing the
»Curves « key.
The curve pairs can be combined as required.
● Press the »Calib./Config.« menu key.
● Press the »Display jj« menu key. The »Curves« menu
appears.
Display (example):
One displayed curve can be replaced by another:
● Select the relevant field = turn the rotary knob.
Activate = press the rotary knob.
The list of all available curves to choose from is displayed on
the right-hand side of the screen.
Display example: Replacing Paw
● Select the other curve (»Flow«) = turn the rotary knob.
Confirm = press the rotary knob.
507522523