EasyManua.ls Logo

Dräger Evita 2 Dura - Clean or Replace Cooling Air Filter; Removing and Reinserting Ambient-Air Filter

Dräger Evita 2 Dura
140 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Care
98
Maintenance Intervals
Clean or replace cooling air filter
Filter must be cleaned or replaced when soiled or at the
latest after 4 weeks.
Replace after 1 year at the latest.
1 Remove cooling-air filter from its slot on the back of
machine.
Replace or clean in warm water with added detergent;
dry well.
Insert cooling-air filter in slot, taking care not to crease it.
Dispose of used cooling-air filter with domestic waste.
Note the Instructions for Use of the option when using the
(optional) DC power supply MB.
Removing and reinserting ambient-air filter
Filter must be cleaned or replaced when soiled or at the
latest after 4 weeks.
Replace filter every year.
2 Swivel port to the left.
3 Unscrew the screw (e.g. with a coin), and remove the
protective cover.
4 Remove the ambient-air filter from the protective cover.
Push the new/cleaned ambient-air filter under the lugs.
Replace protective cover, and tighten screw with a coin.
Dispose of used ambient-air filter with domestic waste.
081
1
088
2
3
089
4

Table of Contents

Other manuals for Dräger Evita 2 Dura

Related product manuals