Dräger Evita 4 - Selecting Displayed Curves

111
Configuration
Screen
Selecting displayed curves
This function serves to combine the two displayed curves
on the standard page.
● Press the »Configuration« key.
● Touch the »Screen« screen key.
Display (example):
● Touch the »Curves« screen key.
Display (example):
Replace one displayed curve by another:
● Touch the corresponding screen key.
Display (example »Flow«):
The selection list containing all available curves is
displayed next to the screen keys.
● Select the other curve = turn rotary knob.
● Confirm selection = press rotary knob.
157 37 207158 37 207159 37 207