Dräger Evita 4 - Ventilation Settings

113
Configuration
Ventilation
Ventilation
This page is used:
– To select the available ventilation modes for the
»Settings« screen page and to select the initial venti-
lation mode.
– To select the patient mode active on switching on the
device.
– To set the ventilation parameters and alarm limits
active on switching on the device.
The configuration menu for the ventilation criteria can only
be opened after entering access code 3032.
This precaution is intended to prevent unauthorised
modifications to the ventilation criteria.
Selecting ventilation modes
To select the ventilation modes on the »Settings« screen
page.
● Press the »Configuration« key.
Display:
● Touch the »Ventilation« screen key.
Enter access code 3032:
● Touch the corresponding screen keys.
163 37 207