Dräger Evita 4 - Selecting Autoflow as Start-Up Ventilation Mode

116
Configuration
Ventilation
Selecting AutoFlow

as start-up ventilation
mode
– For automatically setting the AutoFlow

ventilation
option after switching on the apparatus.
The user can define whether the additional
"AutoFlow

" option is active or not after switching on.
● Press »Configuration« key.
● Touch »Ventilation« screen key.
Display (example):
Enter access code 3032:
● Touch the corresponding screen keys.
Display (example):
● Touch the »Modes« screen key.
Display (example):
To activate AutoFlow in the start-up ventilation mode:
● Touch the »On« screen key
● Confirm selection = press rotary knob.
The AutoFlow option will be automatically activated
the next time the apparatus is switched on.
163 37 207
171 37 207172 37 207