Dräger Evita 4 - Setting Time and Date; Setting Language and Units

125
Configuration
System Defaults
At a programmable regular interval (0 to 60 minutes), all
important measured values of the Evita 4 and all settings
modified since the last printout are automatically printed
out. If the print time interval is set to 0 no printout occurs.
Regardless of the selected time interval, all alarms are
printed out when the alarm conditions occur.
In addition, printout can be manually started by pressing
the »Printer« key. The time interval in progress will remain
unaffected.
Setting time and date
● Press »Configuration« key.
● Touch »System Defaults« screen key and
● touch »Time Date« screen key.
Display (example):
● Change value in cursor (Example [95]) = turn rotary
knob.
● Confirm value = press rotary knob.
Selecting language and units
– To select the desired language for the screen texts,
– To select the units for pressure and CO2 concen-
tration:
● Press »Configuration« key.
● Touch the »System Defaults« screen key.
Display (example):
Select language:
● Touch the »Language/Units« screen key.
● Touch the »Language« screen key.
● Select language = turn rotary knob.
● Confirm language = press rotary knob.
185 37 207186 37 207