Assembling
Mounting the expiration valve
The parts must be entirely dry to prevent malfunctioning.
● Hold stopper by the flange and place diaphragm on
the collar of the stopper.
Be careful to fit the diaphragm properly.
● Insert stopper with diaphragm on top into the housing
from below and screw in tightly.
If the expiration valve has an optional water trap:
● Fit the collecting jar.
Medicament nebuliser
● Assemble in accordance with separate Instructions
for Use.
● Install, see page 89.
Preparing
Assembling
142
To Next Page
Loading...
